Extron FOXBOX SR HDMI Fiber Optic Scaling Receiver driver for Windows 7 - Extron FOXBOX SR HDMI Fiber Optic Scaling Receiver

Extron FOXBOX SR HDMI Fiber Optic Scaling Receiver 1.17

Extron FOXBOX SR HDMI Fiber Optic Scaling Receiver driver from Extron for OS Independent

Extron FOXBOX SR HDMI Fiber Optic Scaling Receiver driver from Extron for OS Independent

Publisher review for Extron FOXBOX SR HDMI Fiber Optic Scaling Receiver 1.17:

Before install Extron FOXBOX SR HDMI Fiber Optic Scaling Receiver 1.17you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Extron FOXBOX SR HDMI Fiber Optic Scaling Receiver . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Extron FOXBOX SR HDMI Fiber Optic Scaling Receiver Firmware 1.17. Fixes:- Fixed an Interlace issue with poor image quality when scaling 1080p to 1080i 59.94 Hz: The 1080i output was only sampling half the field at 540p lines, resulting in missing lines. 1080i scaling now samples both odd/even fields.
- Fixed issue with scaling transition issue: FOXBOX SR HDMI showed scaling transition issues when there was a change in source resolution. When different sources were switched through a matrix, the output image from the FOXBOX SR HDMI was shifted at the top left or zoomed in beyond the output setting of the scaling receiver.
- Fixed Aspect ratio issue: When the FOXBOX SR HDMI output was set to 1080p and the aspect ratio setting configured to "Follow Input", input resolutions with a 16:10 aspect ratio (1280x800, 1440x900 or 1680x1050), were incorrectly recognized as 4:3
Installation steps:1. Open Firmware Loader to establish a connection between the computer and the device. The Add Device... dialog box opens.
2. Select FOXBOX unit from the Device Name drop-down list.
3. Select the method of connection from the Connection Method drop-down list.
4. Depending on the connection method, additional options appear. Make the appropriate selections for the current connection method.
5. Click Connect.
6. Click Browse in the New File Firmware (Optional) panel. The Open window opens.
7. In the Open window, navigate to the new firmware file, which has an .S19 extension, and click Open.
8. Click Add. The Add Device... dialog box closes and the device and firmware are listed in the Firmware Loader main window.
9. Click Begin to start the upload process.
10. Close Firmware Loader when the Remaining Time field shows 00.00.00 , the Progress column shows 100% , and the Status field shows completed.
ATTENTION:- Valid firmware files must have the file extension .S19. A file with any other extension is not a firmware upgrade for this device and could cause the device to stop functioning.

Operating system:
OS Independent